Assembly Language for x86 Processors, 6th edition
http://www.asmirvine.com/
i buy this book and author have his function(Irvine32.inc)
how can i join it(Irvine32.inc) in the masm32
TITLE Add and Subtract (AddSubAlt.asm)
; This program adds and subtracts 32-bit integers.
; 32-bit Protected mode version
.386
.MODEL flat,stdcall
.STACK 4096
ExitProcess PROTO,dwExitCode:DWORD
DumpRegs PROTO ;book say this is MS-window function but i can not success
.code
main PROC
mov eax,10000h ; EAX = 10000h
add eax,40000h ; EAX = 50000h
sub eax,20000h ; EAX = 30000h
call DumpRegs
INVOKE ExitProcess,0
main ENDP
END main |
in the upper right corner - there is a link for downloading the Masm32 package
it wants to be installed in the root directory of the drive that you intend to store projects on
i haven't really mixed the 2 together - i think Jochen did it without too much hassle, though
DumpRegs is an Irvine32 function, i think
you want to start out with
INCLUDE Irvine32.inc
INCLUDE GraphWin.inc
;the following INCLUDELIB's may not be required if using VisualStudio - comment them out
INCLUDELIB Kernel32.lib
INCLUDELIB User32.lib
INCLUDELIB Irvine32.lib
that takes care of the model and processor, as well (view Irvine32.inc for details)
then, DumpRegs should work
ExitProcess PROTO,dwExitCode:DWORD
no comma after PROTO....
ExitProcess PROTO dwExitCode:DWORD
notice that i set the paths for the include and library files
you may have to alter the paths to suit your setup
or - remove the paths altogether if you are using visual studio
if you set up projects like Kip shows you in the book, visual studio knows where they are
INCLUDE C:\Irvine\Irvine32.inc
INCLUDE C:\Irvine\GraphWin.inc
;the following INCLUDELIB's may not be required if using VisualStudio - comment them out
INCLUDELIB C:\Irvine\Lib32\Kernel32.lib
INCLUDELIB C:\Irvine\Lib32\User32.lib
INCLUDELIB C:\Irvine\Lib32\Irvine32.lib
;###############################################################################################
.DATA
;initialized data goes here
szMessage db 'Hello World !",0
;***********************************************************************************************
.DATA?
;uninitialized data goes here
;###############################################################################################
.CODE
;***********************************************************************************************
_main PROC
mov edx,offset szMessage
call WriteString
call WaitMsg
exit
_main ENDP
;###############################################################################################
END _main
1. As Dave already wrote, you need to install the Masm32 package
2. Irvine32Mb.inc is included in the MasmBasic package, and allows free mixing of Irvine32, Masm32 and MasmBasic syntax.
3. JWasm (http://www.japheth.de/JWasm.html)must be installed as \Masm32\bin\JWasm.exe
include \masm32\MasmBasic\MasmBasic.inc ; download (http://www.masm32.com/board/index.php?topic=94.0)
include \masm32\MasmBasic\IrvineMb\Irvine32Mb.inc ; needed to build Irvine's (many but not all) 32-bit examples
TITLE Add and Subtract (AddSubAlt.asm)
; This program adds and subtracts 32-bit integers.
; 32-bit Protected mode version
.code
main PROC
mov eax,10000h ; EAX = 10000h
add eax,40000h ; EAX = 50000h
sub eax,20000h ; EAX = 30000h
call DumpRegs
Inkey CrLf$, "bye"
exit
main endp
end main
P.S.: Instead of DumbRegs, you could use deb:
deb 4, "On entry:", eax, ebx, ecx, edx, esi, edi, x:ebp, x:esp, ST(0), ST(1), ST(2), f:xmm0, xmm0, xmm1, xmm2, xmm3, xmm4, xmm5
It takes registers, local and global variables, and some more (http://www.webalice.it/jj2006/MasmBasicQuickReference.htm#Mb1019) ;-)
Quote from: dedndave on November 28, 2013, 07:32:33 AM
ExitProcess PROTO,dwExitCode:DWORD
no comma after PROTO....
ExitProcess PROTO dwExitCode:DWORD
i put "Example programs and link library source code for Visual Studio 2012" all in the masm32 include
it can Compiler
but i click "AddSub2.exe" not thing work
TITLE Add and Subtract, Version 2 (AddSub2.asm)
; This program adds and subtracts 32-bit integers
; and stores the sum in a variable.
INCLUDE D:\masm32\include\Irvine32.inc
INCLUDE D:\masm32\include\GraphWin.inc
INCLUDELIB D:\masm32\include\Kernel32.lib
INCLUDELIB D:\masm32\include\User32.lib
INCLUDELIB D:\masm32\include\Irvine32.lib
.data
val1 dword 10000h
val2 dword 40000h
val3 dword 20000h
finalVal dword ?
.code
main PROC
mov eax,val1 ; start with 10000h
add eax,val2 ; add 40000h
sub eax,val3 ; subtract 20000h
mov finalVal,eax ; store the result (30000h)
call DumpRegs ; display the registers
exit
main ENDP
END main
you put the Irvine includes in the masm32\include folder ?
not sure that's a good idea
if you installed masm32 on the D: drive, the project must be on the D: drive
and, you don't really want to put the drive letter in the includes
INCLUDE \masm32\include\masm32rt.inc
the masm32 package is designed to use root-relative paths
not sure where you put the Irvine32 includes and libraries
but, you could put them in D:\Irvine or D:\masm32\Irvine
i guess you can put them in D:\masm32\include - but, i wouldn't do it that way
no matter where you put them, make sure the paths match the location
the LIB files are in the LIB folder - the INC files are in the INCLUDE folder
notice that \masm32\lib folder also has a kernel32.lib and user32.lib - that's why i would use different folders
INCLUDELIB D:\masm32\include\Kernel32.lib
INCLUDELIB D:\masm32\include\User32.lib
INCLUDELIB D:\masm32\include\Irvine32.lib
you have it as LIB files in the INCLUDE folder - unless you put the files there, it shouldn't assemble
Quote from: yoursonfather on November 28, 2013, 08:57:22 AM
it can Compiler
but i click "AddSub2.exe" not thing work
Try from a commandline prompt. Most probably, VS forgets to keep the console window open (decent editors like MasmBasic's RichMasm (http://masm32.com/board/index.php?topic=94.0) detect a console program automatically and wait for a keystroke after the exe finishes ;)).
also, Irvine has a function called WaitMsg - similar to masm32's "inkey" macro
both have an "exit" macro, which can cause a conflict, actually
call WaitMsg
INVOKE ExitProcess,0
1.is this code"ExitProcess PROTO,dwExitCode:DWORD
DumpRegs PROTO" need Visual Studio? i do not have this
i install new ml.exe(8.0) but still when i click "my program.exe" not this happen
2.if my computer do not have any Operating system can i control cpu?or gpu? how can them write first program?
thank dedndave and jj2007 answer me :t i trying all day masm32 and Language .they are double hard
i will trying Visual Studio2010 for free.......
well - you're probably trying to bite off more than you can chew :biggrin:
what i mean is, you are trying to get both Irvine32 and Masm32 working at the same time
assembly language requires some patience, at first
and, it's easier if you take things 1 step at a time
trying to set up and learn assembly language, Irvine, masm32, and Visual Studio all at once is too much
today is a holiday, here in the US
but, tomorrow, we can spend more time to get you up and running
we can do a program using just Irvine and a program using just Masm32
then, move forward from there
the first meaningful program is likely to be some sort of operating system
i mean - it's one thing to write some code to make a machine do something
but, until you can edit and save the program, it's just playing around :P
the first program i wrote was in the form of hexadecimal values entered into an EPROM burner - lol
and, the EPROM burner we had wasn't very forgiving - it had minimal edit capabilities
once you get to where you can save files to a disk (or a tape, back then),
you can write an assembler to make programming easier
once they had one computer up and running - they likely wrote cross-assemblers
when IBM developed the code for their first PC, they probably did so using an IBM 360/380 mainframe
(heaven forbid they use an atari or similar)
my older brother worked for a company that put together Altair 8080 computers - lol
the operating system was microsoft basic 1.0, and it loaded from an 8" floppy disk
you turned it on, put the disk in, typed "boot" or something similar - and went and got coffee